Bulb replacement
Front park/turn signal lights
1. Reach behind the headlight assembly, rotate the bulb holder counterclockwise and pull the bulb out (see illustration).
20.1 Rotate the turn signal and marker light bulb holders counterclockwise to remove them from the housing
2. Remove the bulb from the holder.
3. Installation is the reverse of removal.
Rear taillight/brake light/turn signa
4. To access the taillight bulbs, working in the trunk area, lift the taillight access cover (carpet) back.
5. Rotate the bulb holders counter clock- wise and pull the bulbs out to remove them (see illustration).
20.5 Rotate the bulb holder counterclockwise to remove it
6. Installation is the reverse of removal.
High-mounted brake light
7. Remove the rear package shelf (see Body).
8. Twist the bulb holder counterclockwise to remove it, then pull the bulb straight out of the holder.
9. Installation is the reverse of removal.
Instrument cluster lights
10. To gain access to the instrument cluster illumination bulbs, the instrument cluster will have to be removed (see Instrument cluster — removal and installation). The bulbs can then be removed and replaced from the rear of the cluster.
11. Rotate the bulb counterclockwise to remove it.
12. Installation is the reverse of removal.
Interior light
13. Pry the interior lens off the interior light housing (see illustration).
20.13 Carefully pry off the dome light lens using a flat-bladed screwdriver …
14. Detach the bulb from the terminals (see illustration ). It may be necessary to pry the bulb out — if this is the case, pry only on the ends of the bulb (otherwise the glass may shatter).
20.14 … then remove the bulb from the terminals
15. Installation is the reverse of removal.
License plate light
16. Press the release clip from left to right. While holding the clip, push the light housing towards the center and rotate the left side of the housing out, then the right side out.
17. Twist the bulb holder counterclockwise to remove it and replace the bulb
18. Installation is the reverse of removal.
Fog light
19. Raise the vehicle and secure it on jack stands.
20. Remove the front wheels and remove the inner fender covers to access the fog light assembly. Remove the lower splash shield to access the fog light bulbs.
21. Twist the bulb holder from the housing and replace the bulb.
Side turn signal light (Lexus models)
22. Carefully pry the outer cover off of the side view mirror (s) housing.
23. Remove the turn signal mounting fasteners and detach the signal housing from the mirror.
24. Rotate the bulb counterclockwise to remove it.
25. Installation is the reverse of removal.