Instrument cluster — removal and installation
Warning: The models covered by this manual are equipped with Supplemental Restraint Systems (SRS), more commonly known as airbags. Always disable the airbag system before working in the vicinity of any airbag system components to avoid the possibility of accidental deployment of the airbag(s), which could cause personal injury (see Airbag system — general information).
Note: On Avalon models, there are two separate instrument clusters under one instrument cluster trim panel; both are removed the same way.
1. Disconnect the cable from the negative battery terminal (see Engine electrical systems).
2. Remove the steering column covers and the instrument cluster trim panel (see Body).
3. Remove the cluster mounting screws (see illustration) and pull the instrument cluster towards the steering wheel.
11.3 Instrument cluster mounting screws
4. Disconnect any electrical connectors that would interfere with removal.
5. Cover the steering column with a cloth to protect the trim covers, then remove the instrument cluster from the vehicle.
6. Installation is the reverse of removal.