Accelerator Pedal Position (APP) sensor — replacement
Note: The APP sensor and the accelerator pedal are removed as a single assembly.
1. Disconnect the cable from the negative battery terminal (see Engine electrical systems).
2. Working under the dash, disconnect the APP sensor electrical connector (see illustration).
4.2 Typical Accelerator Pedal Position ( APP) sensor details
A Accelerator Pedal Position (APP) sensor
B Electrical connector
C Mounting bolts
3. Remove the accelerator pedal/APP sensor assembly mounting bolts and sensor assembly.
4. Installation is the reverse of removal. Be sure to tighten the accelerator pedal assembly mounting bolts securely.