Manual transaxle lubricant change
1. The lubricant should be drained immediately after the vehicle has been driven. Hot lubricant is more effective than cold fluid at removing built up sediment.
2. After the vehicle has been driven to warm up the fluid, raise it and place it on jack stands for access to the drain plug.
3. Remove the fill plug, then remove the drain plug and drain the lubricant (see Manual transaxle lubricant level check).
4. Reinstall the drain plug securely.
5. Add new lubricant until it begins to run out of the filler hole. See Recommended lubricants and fluids for the specified lubricant type.